How can we help you today?

How-to

How to upgrade the M700 or M300 and handsets via TFTP
Subject Upgrading the DECT M700 and handsets may require using the TFTP method firmware version older than v3.24 or if you have Network policies t...
Tue, 20 Nov, 2018 at 3:52 PM
Installing The g729 DSP Module for the M700
1. Remove the plastic module insert from the M700. There is a single screw that holds the insert in place. 2. Once removed, replace with the g729 D...
Wed, 16 May, 2018 at 6:55 PM
How To Configure RingCentral SIP Settings on the Snom M300 and M700
Once you have your SIP credentials and from your RingCentral account you can configure the M300 or M700 1. Configure the Server configuration on the...
Thu, 15 Jun, 2017 at 12:37 AM
How to use the Local central directory on Snom M700 and M300 DECT bases
The Local Central Directory provides to the connected handsets a Central Address book which is stored on the base itself. How to load the Local Central Dir...
Fri, 4 May, 2018 at 12:19 PM
How to use the Central Directory on Snom M700 and M300 DECT bases
Snom DECT M700 and M300 support a number of differenent central address books locations: Local LDAP Server XML Server XM...
Wed, 15 Nov, 2017 at 4:35 PM
How to Rebuild the DECT Tree After Base Station Removal or Failure
On the Primary. 1. Select "Check All" this will select all of the Secondary bases in the Multicell Chain, except the Primary. 2. Press &...
Fri, 9 Feb, 2018 at 10:17 PM
How do I configure M300/M700 with the SIP Account from my Provider
Generally, VoIP/SIP providers also give their customers instructions to configure the Snom phones. If your provider did not send you any indication on how t...
Fri, 31 Aug, 2018 at 4:38 PM
How to Configure VPN on M215SC
Please see attached the guide & sample files to configure the VPN feature on M215SC: Gen 2 Open VPN config - July 12 '16.pdf This guide referen...
Fri, 31 Aug, 2018 at 5:28 PM