How can we help you today?

How-to

How to make a Master handset reset (M85, M65, M25)
Applicable devices: Snom M85 Snom M65 Snom M25 Please be aware that this procedure clear-out all the settings on the handset and d...
Wed, 21 Oct, 2015 at 1:45 PM
How to use Syslog Server with the DECT M700 and M300
The device log buffer can contain a limited amount of data. For this reason sometimes can be convenient to setup an external syslog server in order to cap...
Tue, 28 Mar, 2017 at 12:36 PM
How to load a SIP client certificate on the DECT M700 and M300 bases
In order to setup a SIP TLS connection in scenarios where the server requests a client certificate, the base must be configured with a pre-loaded TLS client...
Thu, 17 Dec, 2015 at 10:45 AM
How to retrieve the device Serial Number, MAC address and Hardware revision number
For the DECT base The serial number, MAC address and hardware revision number can be found on the back of the Snom DECT base type label For the D...
Fri, 18 Mar, 2016 at 10:58 AM
How to enable IPv6 on M9 and M9r
In order to have IPv6 properly working on the M9 and M9r you have to update the Operating system kernel using the binary reported here.
Tue, 12 Apr, 2016 at 2:13 PM
Switching to Peer to Peer Multicell Configuration
With our DECT Bases, M700 , we could choose between two methods to spread multi cell configuration to other bases in a multi cell environment. ...
Tue, 12 Jul, 2016 at 12:09 PM
Configuring multiple SIP Extensions for a M25/M65/M85 DECT handset
After you have completed the DECT registration process and added the IPEI of the M25/M65/M85 handset to the M300/M700, you can then assign multiple S...
Thu, 21 Jul, 2016 at 7:12 PM
Registering the Konftel 300Wx with the snom DECT M700/M300
Some Konftel 300Wx can be registered on the Snom M700/M300 DECT base stations. v355Bxx of the M700/M300 firmware. There is support for up to 3 Konftel 300W...
Thu, 30 Nov, 2017 at 3:13 PM
Text Messaging Between Handsets
The text messaging feature is new to 355B16 and uses a proprietary protocol, not SIMPLE, and can be used with a Server or with out if you would like to se...
Tue, 3 Jul, 2018 at 2:00 PM
How to properly deploy a DECT multicell system
Base and repeater installation and important notes Base can be wall mounted with screws or with special bracket (bracket is not part of standard packet, sh...
Mon, 4 Sep, 2017 at 1:22 PM