Base M700 fixed red light, Basis M700 dauernd rotes Licht
C
Christoph Hipp
started a topic
4 months ago
Dear friends,
we have 4 M700 configured in multicell mode. One M700 base has a fixed red light. All 16 m25 phones are connected to different base stations also to the one who allways shows a fixed red light. Sip-state of al phones are registerd and OK. Restart of the whole multicell installation and also of the one with the fixed red light has not solved the problem.
What can we do?
Please help.
Best regards
Chris
Hallo,
wir haben 4 M700 Basistationen im Multizellenmode verbunden. Eine Basis zeigt durchgehend ein rotes Licht. Alle 16 M25 Telfone sind verbunden selbnst mit der rot leutchetenden Basis. Der Sip-Status steht bei allen Telefonen auf registried und OK. Mehrfacher Neustart der kompletten Multizelle sowie einzelner Neustarts der betroffenden Basis hat bisher keine Lösung gebracht.
Was kann noch getan werden?
MfG
Chris
Best Answer
G
Gianmaria Tononi
said
4 months ago
Hi Chris,
I've converted this into a private ticket and I will come back to you there since I will probably need some files from your side.
Thank you
1 Comment
G
Gianmaria Tononi
said
4 months ago
Answer
Hi Chris,
I've converted this into a private ticket and I will come back to you there since I will probably need some files from your side.
Christoph Hipp
Dear friends,
we have 4 M700 configured in multicell mode. One M700 base has a fixed red light. All 16 m25 phones are connected to different base stations also to the one who allways shows a fixed red light. Sip-state of al phones are registerd and OK. Restart of the whole multicell installation and also of the one with the fixed red light has not solved the problem.
What can we do?
Please help.
Best regards
Chris
Hallo,
wir haben 4 M700 Basistationen im Multizellenmode verbunden. Eine Basis zeigt durchgehend ein rotes Licht. Alle 16 M25 Telfone sind verbunden selbnst mit der rot leutchetenden Basis. Der Sip-Status steht bei allen Telefonen auf registried und OK. Mehrfacher Neustart der kompletten Multizelle sowie einzelner Neustarts der betroffenden Basis hat bisher keine Lösung gebracht.
Was kann noch getan werden?
MfG
Chris
Hi Chris,
I've converted this into a private ticket and I will come back to you there since I will probably need some files from your side.
Thank you
Gianmaria Tononi
Hi Chris,
I've converted this into a private ticket and I will come back to you there since I will probably need some files from your side.
Thank you
-
Firmware Update Error
-
Snom FW 8.7.3.25 / Snom 720
-
Hold, then direct transfer
-
M325 blinking orange light on base station
-
Importing Device Certificate on DECT M300
-
CTI client for Snom M65
-
Snom M700 M65 and FreePBX
-
Snom m9r and 3CX
-
Need Firmware 323.11
-
Getting 3CX Directory onto Snom M9r Phone
See all 232 topics