I bought the PA1 to set up with my IP phone with a loud speaker. I have a large greenhouse and can't hear the phone ring unless we are right next to it. The PA1 I bought did not come with a power supply so I was hopping that the POE would power it. The powers light isn't coming on?? I thought is was defective and I send the first one back but the replacement is doing the same thing. Am I going to have to get a SNOM 5v DC ps?
What am I doing wrong?
Best Answer
S
Sean Collins
said
12 months ago
Chris,
If you have two new PA1s exhibiting the same behavior then I would suggest looking at the source of the power (your PoE device).
Regards,
Sean Collins
Snom Support
1 Comment
S
Sean Collins
said
12 months ago
Answer
Chris,
If you have two new PA1s exhibiting the same behavior then I would suggest looking at the source of the power (your PoE device).
Chris Ellis
Hi folks,
I bought the PA1 to set up with my IP phone with a loud speaker. I have a large greenhouse and can't hear the phone ring unless we are right next to it. The PA1 I bought did not come with a power supply so I was hopping that the POE would power it. The powers light isn't coming on?? I thought is was defective and I send the first one back but the replacement is doing the same thing. Am I going to have to get a SNOM 5v DC ps?
What am I doing wrong?
Chris,
If you have two new PA1s exhibiting the same behavior then I would suggest looking at the source of the power (your PoE device).
Regards,
Sean Collins
Snom Support
Sean Collins
Chris,
If you have two new PA1s exhibiting the same behavior then I would suggest looking at the source of the power (your PoE device).
Regards,
Sean Collins
Snom Support
-
Firmware Update Error
-
Snom FW 8.7.3.25 / Snom 720
-
Hold, then direct transfer
-
M325 blinking orange light on base station
-
Importing Device Certificate on DECT M300
-
CTI client for Snom M65
-
Snom M700 M65 and FreePBX
-
Snom m9r and 3CX
-
Need Firmware 323.11
-
Getting 3CX Directory onto Snom M9r Phone
See all 165 topics