How can we help you today?
Start a new topic
Answered

Snom 300 Downgrade from 7.3,30 to 6.5.13 Password required

Snom 300

MAC: 0004134A74B9

I tried to downgrade a Snom 300 from Firmware Version

7.3,30 to 6.5.13 as  described in

http://wiki.snom.com/Firmware/V7/Manual_Downgrade

Everything went well untill the end of Part1 

After rebooting a HTTP Password is reuired

The Part2 can not be executed 

No Password was set before the downgrade but now, both Passwords - HTTP and Admin mode - are set with a unknown value.

The phone display shows the mesage

SIP disableX:YZP with changing numerical values for X:YZ.

Configuration-Reset On Phone UI in not possible 

- unknown Password required  

The FW-Version displayed is S300-SIP 7to6.

TFTP-Recovery as described in
http://wiki.snom.com/Firmware/Update/TFTP_Update#Update_for_Snom3xx_using_Pumpkin 

is not possble: after entering the phone IP, the message "mage not loaded" is diaplayed. - no prompt for netmask no prompt for Server-IP. 

Entering the server-ip first delievers the same result in coincidence with a doble-IP error message on the PC.


I need the user name and password for the HTTP login 

or another solution


Best regards

Michael .

 

 


Best Answer

Hi Michael,


Ticket 13876 was created for this issue.


Thanks

Catalina


Answer

Hi Michael,


Ticket 13876 was created for this issue.


Thanks

Catalina

Login or Signup to post a comment