it is possible to turn off the WebUI. Could you please make sure what its status is:
Using the PhoneUI - Menu - Network - Webserver - Webserver Type
Greetings Norman
BTW: Please also notice the difference in the IPs you mentioned in your post (.50 vs. .57)
E
Emad Alzaobi
said
about 3 years ago
yes
i have three phones and wrote here by mistake the ip address for another phone but all of these three ip phone showing the same message that i pasted above
are there any solution to access the webpage interface for these phones?
i tried to turnoff the firewall but the sames issue
i tried to create the port 443 in the firewall and the same issue im still not able to access the ip phone through browser.
N
Norman Schwirske
said
about 3 years ago
Answer
Hi Emad,
please state the status of the Webserver. Is it enabled? If so, please try to switch to "HTTP Only", then you should reach the phone on port 80.
Please also contact your system administrator, if the WebUI is disabled for a reason.
Emad Alzaobi
i'm unable to login into web interface for snom ip phone. I tried to login through the local ip as shown here:
https://10.2.2.50:443 its showing the following message:
This site can’t be reached
10.2.2.57 took too long to respond.
Try:
Checking the connectionChecking the proxy and the firewallRunning Windows Network Diagnostics
ERR_TIMED_OUT
Hi Emad,
please state the status of the Webserver.
Is it enabled? If so, please try to switch to "HTTP Only", then you should reach the phone on port 80.
Please also contact your system administrator, if the WebUI is disabled for a reason.
Greetings
Norman
- Oldest First
- Popular
- Newest First
Sorted by Oldest FirstNorman Schwirske
Hi Emad,
it is possible to turn off the WebUI.
Could you please make sure what its status is:
Using the PhoneUI - Menu - Network - Webserver - Webserver Type
Greetings
Norman
BTW: Please also notice the difference in the IPs you mentioned in your post (.50 vs. .57)
Emad Alzaobi
yes
i have three phones and wrote here by mistake the ip address for another phone but all of these three ip phone showing the same message that i pasted above
are there any solution to access the webpage interface for these phones?
i tried to turnoff the firewall but the sames issue
i tried to create the port 443 in the firewall and the same issue im still not able to access the ip phone through browser.
Norman Schwirske
Hi Emad,
please state the status of the Webserver.
Is it enabled? If so, please try to switch to "HTTP Only", then you should reach the phone on port 80.
Please also contact your system administrator, if the WebUI is disabled for a reason.
Greetings
Norman
Emad Alzaobi
thank you its working now
i switched to http instead of https
thank you again
-
LDAP and country code
-
Settings are changed when user logs on
-
USB Bluetooth compatibility for D725
-
Low volume with Plantronics Headset
-
Change Log for FW 8.8.3.32
-
Subscriptions failing after time since upgrade to 8.7.5.28
-
SNOM 870 - INBAND DTMF
-
SNOM 320 + Headset Plantronics CS540A with Snom EHS
-
Configure Settings - Set all to Read Only
-
Can't enter "+" sign in directory via WUI
See all 716 topics