Hi, I realized just after a few months that calls were forwarding to my forwarded number and I could not figure out why. I set up call forwarding and then disabled it through the handset. I browsed into the web interface and noticed that while the forwarding option was not checked in anymore, calls were still forwarding to the number listed in the corresponding box. After I cleared the number, calls began to flow normally. Please fix as this has caused me a lot of inconvenience.
Best Answer
L
Luca Livraga
said
over 3 years ago
Dear Paul,
please, try to upgrade to our latest version (both base and handsets) and test if this behavior happens again:
Paul Latour
Hi, I realized just after a few months that calls were forwarding to my forwarded number and I could not figure out why. I set up call forwarding and then disabled it through the handset. I browsed into the web interface and noticed that while the forwarding option was not checked in anymore, calls were still forwarding to the number listed in the corresponding box. After I cleared the number, calls began to flow normally. Please fix as this has caused me a lot of inconvenience.
Dear Paul,
please, try to upgrade to our latest version (both base and handsets) and test if this behavior happens again:
http://wiki.snom.com/M-series/Firmware
Best regards
Luca Livraga
Dear Paul,
please, try to upgrade to our latest version (both base and handsets) and test if this behavior happens again:
http://wiki.snom.com/M-series/Firmware
Best regards
-
Firmware Update Error
-
Snom FW 8.7.3.25 / Snom 720
-
Hold, then direct transfer
-
M325 blinking orange light on base station
-
Importing Device Certificate on DECT M300
-
CTI client for Snom M65
-
Snom M700 M65 and FreePBX
-
Snom m9r and 3CX
-
Need Firmware 323.11
-
Getting 3CX Directory onto Snom M9r Phone
See all 231 topics