Could you please instruct how to turn off or reduce the volume Keytones?
Firmware-Version: snom300-SIP 8.4.31
Settings/keytones - doesn't work: with value "off" keytones are active whatever
Settings/keytones Removed in: 8.7.3
How to solve this task - turning off or reduction the volume Keytones?
Thank you in advance
You can set the following settings to a value of off;
http://wiki.snom.com/Settings/dtmf_speaker_phone
http://wiki.snom.com/Settings/dtmf_handset_phone
This will disable dtmf playback to the speakerphone and handset.
Regards,
Thank you.
Issue is solwed
Natalya
Could you please instruct how to turn off or reduce the volume Keytones?
Firmware-Version: snom300-SIP 8.4.31
Settings/keytones - doesn't work: with value "off" keytones are active whatever
Settings/keytones Removed in: 8.7.3
How to solve this task - turning off or reduction the volume Keytones?
Thank you in advance
You can set the following settings to a value of off;
http://wiki.snom.com/Settings/dtmf_speaker_phone
http://wiki.snom.com/Settings/dtmf_handset_phone
This will disable dtmf playback to the speakerphone and handset.
Regards,
- Oldest First
- Popular
- Newest First
Sorted by Oldest FirstSean Collins
You can set the following settings to a value of off;
http://wiki.snom.com/Settings/dtmf_speaker_phone
http://wiki.snom.com/Settings/dtmf_handset_phone
This will disable dtmf playback to the speakerphone and handset.
Regards,
Natalya
Thank you.
Issue is solwed
-
LDAP and country code
-
Settings are changed when user logs on
-
USB Bluetooth compatibility for D725
-
Low volume with Plantronics Headset
-
Change Log for FW 8.8.3.32
-
Subscriptions failing after time since upgrade to 8.7.5.28
-
SNOM 870 - INBAND DTMF
-
SNOM 320 + Headset Plantronics CS540A with Snom EHS
-
Configure Settings - Set all to Read Only
-
Can't enter "+" sign in directory via WUI
See all 713 topics