SNOM 760 - sending dhcp requests message displayed while booting
S
Serban Ivascu
started a topic
over 4 years ago
I am trying to configure a SNOM 760 with firmware 8.8.3.27 after a factory reset- it gets stuck on sending DHCP requests message displayed while booting. If I press the X button it will finish the booting but it will not receive an IP. I have plugged in other VoIP phones from a different vendor and they do get an IP on the same port. I have reset the phone again, the behavior is the same.
Serban Ivascu
I am trying to configure a SNOM 760 with firmware 8.8.3.27 after a factory reset- it gets stuck on sending DHCP requests message displayed while booting. If I press the X button it will finish the booting but it will not receive an IP. I have plugged in other VoIP phones from a different vendor and they do get an IP on the same port. I have reset the phone again, the behavior is the same.
Dear Serban,
we are glad your problem is solved.
Some interesting links to that topic:
http://wiki.snom.com/Category:HowTo:DHCP
http://wiki.snom.com/Settings/dhcp
- Oldest First
- Popular
- Newest First
Sorted by Oldest FirstSerban Ivascu
Problem solved
Norman Schwirske
Dear Serban,
we are glad your problem is solved.
Some interesting links to that topic:
http://wiki.snom.com/Category:HowTo:DHCP
http://wiki.snom.com/Settings/dhcp
-
LDAP and country code
-
Settings are changed when user logs on
-
USB Bluetooth compatibility for D725
-
Low volume with Plantronics Headset
-
Change Log for FW 8.8.3.32
-
Subscriptions failing after time since upgrade to 8.7.5.28
-
SNOM 870 - INBAND DTMF
-
SNOM 320 + Headset Plantronics CS540A with Snom EHS
-
Configure Settings - Set all to Read Only
-
Can't enter "+" sign in directory via WUI
See all 715 topics