Hi,
Seems that changing QOS value does not work. (firmware 355) - I also rebooted the cell -
I've changed the SIP to 0x18 (CS3) and RTP to 0x2E (EF) but it's still AF11 for both RTP and SIP.
Im going to convert this as a ticket
BR
Hi Antoine could you check inside your M700 web interface at http://IP/Network.html webpage and later at http://IP/Settings.html?xml=1 if it appears:
<codec_tos>46</codec_tos><signaling_tos>24</signaling_tos>
Let me know your comments
Alberto
Antoine DEBARRE
Hi,
Seems that changing QOS value does not work. (firmware 355) - I also rebooted the cell -
I've changed the SIP to 0x18 (CS3) and RTP to 0x2E (EF) but it's still AF11 for both RTP and SIP.
Im going to convert this as a ticket
BR
- Oldest First
- Popular
- Newest First
Sorted by Oldest FirstAlberto Sagredo Castro
Hi Antoine could you check inside your M700 web interface at http://IP/Network.html webpage and later at http://IP/Settings.html?xml=1 if it appears:
<codec_tos>46</codec_tos><signaling_tos>24</signaling_tos>
Let me know your comments
BR
Alberto
Antoine DEBARRE
Yes I have the following :"<codec_tos>46</codec_tos>
<signaling_tos>24</signaling_tos>" in http://IP/Settings.html?xml=1
Alberto Sagredo Castro
Im going to convert this as a ticket
BR
-
Firmware Update Error
-
Snom FW 8.7.3.25 / Snom 720
-
Hold, then direct transfer
-
M325 blinking orange light on base station
-
Importing Device Certificate on DECT M300
-
CTI client for Snom M65
-
Snom M700 M65 and FreePBX
-
Snom m9r and 3CX
-
Need Firmware 323.11
-
Getting 3CX Directory onto Snom M9r Phone
See all 230 topics