Hardware used: Snom 760, Axis m7001 video encoder, Viking IP intercom
I have configure an action URL to display the video on the snom 760. It can display it successfully. However, when I pick up the handset, the video is disappeared. The video call cannot be made.
Actually, I would like to make a video call from the IP intercom by pressing the call button in order to call the snom 760, so that the video stream can by displayed on snom 760. How can I make it? Thx!
Venice
Best Answer
A
Alberto Sagredo Castro
said
over 4 years ago
Thanks Venice
You could take a look to this guide , its for 2n video door and D765 but maybe it could be useful for you also.
Please find an xml file attached and try again. Maybe you would need to deploy an http local server for that (webserverip inside xml file needs to be change to your actual http web server
I am using the Axis m7001 video encoder. I have insert this Action URL into the function key: http://root:root@192.168.0.44/axis-cgi/mjpg/video.cgi?resolution=176x120#mjpg
It is able to show the JPG image of IP intercom when pressing the function key.
However, I do not want the image of the IP intercom to be shown all the time, I just want it to show on the screen when the IP intercom call the snom 760. I have also insert the above action URL for incoming calls, but it is not success. How can I do it? Thx!
Alberto Sagredo Castro
said
over 4 years ago
HI Venice
Which firmware are you running on 760?
Regards
V
Venice Lam
said
over 4 years ago
Hi
The snom 760 is runnung the firmware 8.7.5.28, thx
Alberto Sagredo Castro
said
over 4 years ago
Answer
Thanks Venice
You could take a look to this guide , its for 2n video door and D765 but maybe it could be useful for you also.
Please find an xml file attached and try again. Maybe you would need to deploy an http local server for that (webserverip inside xml file needs to be change to your actual http web server
Hi! Thanks for your answer, i didn't arrive to display a mjpg stream. Where we can enter the parameters to display a video when a ddor phone is calling?
Venice Lam
Hardware used: Snom 760, Axis m7001 video encoder, Viking IP intercom
I have configure an action URL to display the video on the snom 760. It can display it successfully. However, when I pick up the handset, the video is disappeared. The video call cannot be made.
Actually, I would like to make a video call from the IP intercom by pressing the call button in order to call the snom 760, so that the video stream can by displayed on snom 760. How can I make it? Thx!
Venice
Thanks Venice
You could take a look to this guide , its for 2n video door and D765 but maybe it could be useful for you also.
https://wiki.2n.cz/pages/viewpage.action?pageId=59080895
Please find an xml file attached and try again. Maybe you would need to deploy an http local server for that (webserverip inside xml file needs to be change to your actual http web server
- Oldest First
- Popular
- Newest First
Sorted by Oldest FirstAlberto Sagredo Castro
HI Venice
SNOM 760 could not have video calls, as it does not support video codecs.
What you could use is the XML Browser capability in order to show JPG fixed images (refreshed every x secs) into screen.
We have a feature used by some video door devices as 2N, that previews video before and during call as you want.
Take a look to http://wiki.snom.com/XML/Minibrowser/Video
But in your case maybe you could use Action URL for incoming calls. It will work for every call received .
As told you, the only way to have in video door calls would be if you are able to send a spacial notify regarding and xml action url for that call.
Hope this helps
BR
Alberto
Venice Lam
I am using the Axis m7001 video encoder. I have insert this Action URL into the function key: http://root:root@192.168.0.44/axis-cgi/mjpg/video.cgi?resolution=176x120#mjpg
It is able to show the JPG image of IP intercom when pressing the function key.
However, I do not want the image of the IP intercom to be shown all the time, I just want it to show on the screen when the IP intercom call the snom 760. I have also insert the above action URL for incoming calls, but it is not success. How can I do it? Thx!
Alberto Sagredo Castro
HI Venice
Which firmware are you running on 760?
Regards
Venice Lam
Hi
The snom 760 is runnung the firmware 8.7.5.28, thx
Alberto Sagredo Castro
Thanks Venice
You could take a look to this guide , its for 2n video door and D765 but maybe it could be useful for you also.
https://wiki.2n.cz/pages/viewpage.action?pageId=59080895
Please find an xml file attached and try again. Maybe you would need to deploy an http local server for that (webserverip inside xml file needs to be change to your actual http web server
harnois sylvain
Did the snom D765 or D375 can display RSTP stream when a call is coming from a specific station?
Thanks
Best regards
Alberto Sagredo Castro
HI Harnois
Snom Phones are capable to show JPEG streams refreshed, you would need to convert RTSP flow into MJPEG to be able to show in our phones.
You could use ffmpeg for example:
ffmpeg -loglevel fatal -i rtsp://remoteip/stream=1.sdp -vframes 1 -r 1 capture.jpg
Best Regards
harnois sylvain
Where we can enter the parameters to display a video when a ddor phone is calling?
Thanks for your answer
Alberto Sagredo Castro
HI Harnois
We already answered you via helpdesk
Let me know if you need more assistance
BR
Alberto
-
LDAP and country code
-
Settings are changed when user logs on
-
USB Bluetooth compatibility for D725
-
Low volume with Plantronics Headset
-
Change Log for FW 8.8.3.32
-
Subscriptions failing after time since upgrade to 8.7.5.28
-
SNOM 870 - INBAND DTMF
-
SNOM 320 + Headset Plantronics CS540A with Snom EHS
-
Configure Settings - Set all to Read Only
-
Can't enter "+" sign in directory via WUI
See all 715 topics