zurzeit haben wir mit den neuen DECT Geräten mehr Probleme als uns lieb ist.
Das aktuellste ist das sich bei zwei M325 ein identisches Verhalten zeigt, der Call wird ca. nach 30 sec einfach beendet.
Konfiguration
Vodia 5.4.1
DECT M325 / M25 Firmware 324
Ein anderes Thema ist der Betrieb, nach einer Laufzeit von 2 - 3 Wochen ist auf einmal die Konfiguration in der Basisstation M700 nicht mehr vorhanden und muss neu provisioniert werden.
Bitte eine Info zu dem Problem der 30 sec Calls da dies sonst die erste Rückabwicklung wird.
Finden die Lösungen nicht schlecht aber Businesstauglich sieht anders aus.
Gruß aus Nürnberg
Best Answer
A
Alberto Sagredo Castro
said
over 4 years ago
Dear Rene
Do you mind if i answer you in English?
About dropped calls , 30 secs is due to non ACK received after a 200 OK.
Could you check if that is the problem? Are DECT devices connected behind NAT to PBX?
About other problem a syslog when this happens would be great in order to inspect.
Best regards
Alberto
1 Comment
Alberto Sagredo Castro
said
over 4 years ago
Answer
Dear Rene
Do you mind if i answer you in English?
About dropped calls , 30 secs is due to non ACK received after a 200 OK.
Could you check if that is the problem? Are DECT devices connected behind NAT to PBX?
About other problem a syslog when this happens would be great in order to inspect.
Rene Eichner
Hallo,
zurzeit haben wir mit den neuen DECT Geräten mehr Probleme als uns lieb ist.
Das aktuellste ist das sich bei zwei M325 ein identisches Verhalten zeigt, der Call wird ca. nach 30 sec einfach beendet.
Konfiguration
Vodia 5.4.1
DECT M325 / M25 Firmware 324
Ein anderes Thema ist der Betrieb, nach einer Laufzeit von 2 - 3 Wochen ist auf einmal die Konfiguration in der Basisstation M700 nicht mehr vorhanden und muss neu provisioniert werden.
Bitte eine Info zu dem Problem der 30 sec Calls da dies sonst die erste Rückabwicklung wird.
Finden die Lösungen nicht schlecht aber Businesstauglich sieht anders aus.
Gruß aus Nürnberg
Dear Rene
Do you mind if i answer you in English?
About dropped calls , 30 secs is due to non ACK received after a 200 OK.
Could you check if that is the problem? Are DECT devices connected behind NAT to PBX?
About other problem a syslog when this happens would be great in order to inspect.
Best regards
Alberto
Alberto Sagredo Castro
Dear Rene
Do you mind if i answer you in English?
About dropped calls , 30 secs is due to non ACK received after a 200 OK.
Could you check if that is the problem? Are DECT devices connected behind NAT to PBX?
About other problem a syslog when this happens would be great in order to inspect.
Best regards
Alberto
-
Firmware Update Error
-
Snom FW 8.7.3.25 / Snom 720
-
Hold, then direct transfer
-
M325 blinking orange light on base station
-
Importing Device Certificate on DECT M300
-
CTI client for Snom M65
-
Snom M700 M65 and FreePBX
-
Snom m9r and 3CX
-
Need Firmware 323.11
-
Getting 3CX Directory onto Snom M9r Phone
See all 232 topics