If the two M700 are in different places you need to enable multiprimary option (in this environment M700s must reach each other via peer to peer or multicast but not via DECT signal).
If the two M700 are in different places you need to enable multiprimary option (in this environment M700s must reach each other via peer to peer or multicast but not via DECT signal).
Regards
S
Sivarajah Thanush
said
over 4 years ago
Thanks for reply
Which option i change ?? please
S
Sivarajah Thanush
said
over 4 years ago
i can have a help this topic , please
L
Luca Livraga
said
over 4 years ago
Dear Sivarajah,
both base stations need to have same firmware version and NTP server.
Once you have enabled the multicell option on the second one, they will join in a chain
Best regards
S
Sync Account
said
over 4 years ago
Dear Sivarajah,
Please also follow the checklist we published here:
Sivarajah Thanush
Bonjour ,
J'ai installé 2 Base M700 dans différent endroits et mis en place 2 M65
Mais les 2 téléphone ne bascule pas tous les 2
c'est à dire , que chaque telephone se connecter sur une base
Je pense qu'il faut activer le roaming sur les bases , non ??
Merci de votre aide
Dear Sivarajah,
you can find all information on our multicell deployment guide here:
http://downloads.snom.net/documentation/M700_Multicell_Deployment_Guide.pdf
If the two M700 are in different places you need to enable multiprimary option (in this environment M700s must reach each other via peer to peer or multicast but not via DECT signal).
Regards
- Oldest First
- Popular
- Newest First
Sorted by Oldest FirstLuca Livraga
Dear Sivarajah,
you can find all information on our multicell deployment guide here:
http://downloads.snom.net/documentation/M700_Multicell_Deployment_Guide.pdf
If the two M700 are in different places you need to enable multiprimary option (in this environment M700s must reach each other via peer to peer or multicast but not via DECT signal).
Regards
Sivarajah Thanush

Thanks for replyWhich option i change ?? please
Sivarajah Thanush
i can have a help this topic , please
Luca Livraga
Dear Sivarajah,
both base stations need to have same firmware version and NTP server.
Once you have enabled the multicell option on the second one, they will join in a chain
Best regards
Sync Account
Dear Sivarajah,
Please also follow the checklist we published here:
https://helpdesk.snom.com/support/solutions/articles/6000129579-my-m700-refuses-to-join-the-dect-chain
-
Firmware Update Error
-
Snom FW 8.7.3.25 / Snom 720
-
Hold, then direct transfer
-
M325 blinking orange light on base station
-
Importing Device Certificate on DECT M300
-
CTI client for Snom M65
-
Snom M700 M65 and FreePBX
-
Snom m9r and 3CX
-
Need Firmware 323.11
-
Getting 3CX Directory onto Snom M9r Phone
See all 231 topics