Call Indicator - Not Flashing When Receiving Additional Calls
L
Laurie Yeates
started a topic
over 4 years ago
Hello,
I have a snom 710 with 2 identities, when I was on the phone and I received a second or another call (on either identity), the call indicator used to flash to alert me to another incoming call.
It has stopped doing this; (so the only way to check to see if I have missed a call is to check the call log after each call to see if I have missed a call; this is very annoying. I have tried to find how to change the settings, and whilst there seems to be a way to change what the call indicator shows, I cannot find any instructions on how to do this. Can anyone please advise. Thank you
Best Answer
S
Sean Collins
said
over 4 years ago
The setting you need to enable, if it has been disabled, is call_waiting. This setting will possibly need to be configured via your Provisioning Server if you are using one, but you can also use a HTTP GET request to the phone and set the setting.
You can set it by copying and pasting the command into your Web Browser. You will need to change the "phoneIP" to the actual IP address of your phone.
The setting you need to enable, if it has been disabled, is call_waiting. This setting will possibly need to be configured via your Provisioning Server if you are using one, but you can also use a HTTP GET request to the phone and set the setting.
You can set it by copying and pasting the command into your Web Browser. You will need to change the "phoneIP" to the actual IP address of your phone.
Laurie Yeates
Hello,
I have a snom 710 with 2 identities, when I was on the phone and I received a second or another call (on either identity), the call indicator used to flash to alert me to another incoming call.
It has stopped doing this; (so the only way to check to see if I have missed a call is to check the call log after each call to see if I have missed a call; this is very annoying. I have tried to find how to change the settings, and whilst there seems to be a way to change what the call indicator shows, I cannot find any instructions on how to do this. Can anyone please advise. Thank you
The setting you need to enable, if it has been disabled, is call_waiting. This setting will possibly need to be configured via your Provisioning Server if you are using one, but you can also use a HTTP GET request to the phone and set the setting.
You can set it by copying and pasting the command into your Web Browser. You will need to change the "phoneIP" to the actual IP address of your phone.
http://phoneIP/dummy.htm?settings=save&call_waiting=on
http://wiki.snom.com/Settings/call_waiting
Sean Collins
The setting you need to enable, if it has been disabled, is call_waiting. This setting will possibly need to be configured via your Provisioning Server if you are using one, but you can also use a HTTP GET request to the phone and set the setting.
You can set it by copying and pasting the command into your Web Browser. You will need to change the "phoneIP" to the actual IP address of your phone.
http://phoneIP/dummy.htm?settings=save&call_waiting=on
http://wiki.snom.com/Settings/call_waiting
-
LDAP and country code
-
Settings are changed when user logs on
-
USB Bluetooth compatibility for D725
-
Low volume with Plantronics Headset
-
Change Log for FW 8.8.3.32
-
Subscriptions failing after time since upgrade to 8.7.5.28
-
SNOM 870 - INBAND DTMF
-
SNOM 320 + Headset Plantronics CS540A with Snom EHS
-
Configure Settings - Set all to Read Only
-
Can't enter "+" sign in directory via WUI
See all 677 topics