Hello everyone, i have a problem with the German Telekom. I want to use 2 M700 as a Multicell directly connected to the Telekom. At the moment I have 3 Telephone numbers, which I want to configure on the M700. This 3 Numbers should be used by 6 M65. Is there anyone who has done this before? I don't know what I have to do.
Regards
Sönke Jensen
Best Answer
S
Sync Account
said
over 4 years ago
Hello Sönke,
What you can do is to configure the 3 numbers over 3 handsets: so one handsets has a single number assigned.
Please be aware that without a PBX the call features will be very limited: no IVR, no voicemail, etc..
1 Comment
S
Sync Account
said
over 4 years ago
Answer
Hello Sönke,
What you can do is to configure the 3 numbers over 3 handsets: so one handsets has a single number assigned.
Please be aware that without a PBX the call features will be very limited: no IVR, no voicemail, etc..
Sönke Jensen
i have a problem with the German Telekom. I want to use 2 M700 as a Multicell directly connected to the Telekom. At the moment I have 3 Telephone numbers, which I want to configure on the M700. This 3 Numbers should be used by 6 M65. Is there anyone who has done this before? I don't know what I have to do.
Regards
Sönke Jensen
Hello Sönke,
What you can do is to configure the 3 numbers over 3 handsets: so one handsets has a single number assigned.
Please be aware that without a PBX the call features will be very limited: no IVR, no voicemail, etc..
Sync Account
Hello Sönke,
What you can do is to configure the 3 numbers over 3 handsets: so one handsets has a single number assigned.
Please be aware that without a PBX the call features will be very limited: no IVR, no voicemail, etc..
-
Firmware Update Error
-
Snom FW 8.7.3.25 / Snom 720
-
Hold, then direct transfer
-
M325 blinking orange light on base station
-
Importing Device Certificate on DECT M300
-
CTI client for Snom M65
-
Snom M700 M65 and FreePBX
-
Snom m9r and 3CX
-
Need Firmware 323.11
-
Getting 3CX Directory onto Snom M9r Phone
See all 232 topics