I have a Snom 320 which has the G.723.1 codec but do not see if the user can select Annex A Support (DTX Mode) or select between rates 5300 or 6300 bps.
Best Answer
S
Sidaty Khalihina
said
over 4 years ago
Hi,
Supported codecs depends from the hardware and the firmware version too.
see the following overview:
http://wiki.snom.com/Codec_Overview
1 Comment
S
Sidaty Khalihina
said
over 4 years ago
Answer
Hi,
Supported codecs depends from the hardware and the firmware version too.
Steven Saverino
I have a Snom 320 which has the G.723.1 codec but do not see if the user can select Annex A Support (DTX Mode) or select between rates 5300 or 6300 bps.
Hi,
Supported codecs depends from the hardware and the firmware version too.
see the following overview:
http://wiki.snom.com/Codec_Overview
Sidaty Khalihina
Hi,
Supported codecs depends from the hardware and the firmware version too.
see the following overview:
http://wiki.snom.com/Codec_Overview
-
LDAP and country code
-
Settings are changed when user logs on
-
USB Bluetooth compatibility for D725
-
Low volume with Plantronics Headset
-
Change Log for FW 8.8.3.32
-
Subscriptions failing after time since upgrade to 8.7.5.28
-
SNOM 870 - INBAND DTMF
-
SNOM 320 + Headset Plantronics CS540A with Snom EHS
-
Configure Settings - Set all to Read Only
-
Can't enter "+" sign in directory via WUI
See all 715 topics