I'm experiencing the exact same problem. Very annoying.
J
Jeffrey Loy
said
almost 5 years ago
Got another one here. I did everything suggested by Tech Support including a factory reset and reset up. The problem persists.
F
Florian Pose
said
over 4 years ago
The same here with current FW 9.6.13-a.
S
Sync Account
said
over 4 years ago
Answer
Dear all,
unfortunately this is a known issue internally reported with ID: #DECT-325
C
Chip Barnett
said
over 4 years ago
This pretty pathetic. From what I've read this was an issue 4 years ago resolved with a firmware upgrade and now here we are 4 years later still having the same issue. It was embarrassing in front of the client today.
Daniel Dickinson
E..g at 11:50 PM EST Sat, Feb 13, it shows 11:50 PM EST Sunday Feb 13.
What gives?
It is *always* a day off for the day name and I have tried the latest firmware.
Regards,
Daniel
Dear all,
unfortunately this is a known issue internally reported with ID: #DECT-325
- Oldest First
- Popular
- Newest First
Sorted by Oldest FirstRandal DePriest
Jeffrey Loy
Got another one here. I did everything suggested by Tech Support including a factory reset and reset up. The problem persists.
Florian Pose
Sync Account
Dear all,
unfortunately this is a known issue internally reported with ID: #DECT-325
Chip Barnett
-
Firmware Update Error
-
Snom FW 8.7.3.25 / Snom 720
-
Hold, then direct transfer
-
M325 blinking orange light on base station
-
Importing Device Certificate on DECT M300
-
CTI client for Snom M65
-
Snom M700 M65 and FreePBX
-
Snom m9r and 3CX
-
Need Firmware 323.11
-
Getting 3CX Directory onto Snom M9r Phone
See all 231 topics