Hi, i have a Snom 300 phone with latest firmware installed (8.7.5.17). Can i disable a function key when the phone is on-hook ? Is this possible via xml configuration ?
Best Answer
S
Sync Account
said
about 5 years ago
Hello Stefano,
you are asking about to disable a function key behaviour when the phone is on-hook ?
Stefano Vannucci
Hi, i have a Snom 300 phone with latest firmware installed (8.7.5.17). Can i disable a function key when the phone is on-hook ? Is this possible via xml configuration ?
Hello Stefano,
you are asking about to disable a function key behaviour when the phone is on-hook ?
In case you can setup two Action URLs:
action_onhook_url=http://127.0.0.1/dummy.htm?settings=save&fkey1=
action_offhook_url=http://127.0.0.1/dummy.htm?settings=save&fkey1=speed%20300
In this way when the handset is on-hook the fkey1 is un-configured, when you lift the handset the fkey1 gets configured as a speed dial.
In case your phone we gui is configured to require authentication you should put your credentials into the action URL:
action_onhook_url=http://admin:passwd@127.0.0.1/dummy.htm?settings=save&fkey1=
See more here:
http://wiki.snom.com/Settings/action_offhook_url
http://wiki.snom.com/Settings/action_onhook_url
http://wiki.snom.com/Category:HowTo:Action_URL
Hope it helps,
Sync Account
Hello Stefano,
you are asking about to disable a function key behaviour when the phone is on-hook ?
In case you can setup two Action URLs:
action_onhook_url=http://127.0.0.1/dummy.htm?settings=save&fkey1=
action_offhook_url=http://127.0.0.1/dummy.htm?settings=save&fkey1=speed%20300
In this way when the handset is on-hook the fkey1 is un-configured, when you lift the handset the fkey1 gets configured as a speed dial.
In case your phone we gui is configured to require authentication you should put your credentials into the action URL:
action_onhook_url=http://admin:passwd@127.0.0.1/dummy.htm?settings=save&fkey1=
See more here:
http://wiki.snom.com/Settings/action_offhook_url
http://wiki.snom.com/Settings/action_onhook_url
http://wiki.snom.com/Category:HowTo:Action_URL
Hope it helps,
-
LDAP and country code
-
Settings are changed when user logs on
-
USB Bluetooth compatibility for D725
-
Low volume with Plantronics Headset
-
Change Log for FW 8.8.3.32
-
Subscriptions failing after time since upgrade to 8.7.5.28
-
SNOM 870 - INBAND DTMF
-
SNOM 320 + Headset Plantronics CS540A with Snom EHS
-
Configure Settings - Set all to Read Only
-
Can't enter "+" sign in directory via WUI
See all 716 topics